HP Homogenisation
HP202 Inline high-pressure homogeniser
Introduction
The OMVE inline high pressure homogeniser is designed to perform in line (for example with the OMVE HT220 UHT system) as well as stand-alone.
The double-piston homogeniser comes standard on a mobile frame and with a stainless steel hopper for stand-alone use. The change-over from an inline system to a stand-alone system is completed within minutes. The HP202 is standard equipped with a connection set for up-stream and down-stream homogenisation.
Features
- Flexible connection set allowing up- and downstream homogenisation
- Removable stainless steel funnel allowing stand-alone and inline use
- Variable throughput, adjustable to the flow rate of the UHT system
- Standard with two stage homogenisation valves to enable simulation of most applications
- Analogue pressure gauges
- Comprehensive safety device
- Mounted on a mobile frame
- Minimum dead volume to minimise product loss
- Allows CIP and SIP configuration in line with a UHT system
Specifications show/hide
Process
| Max. viscosity (stand alone) | 1000cPs |
| Max. viscosity (inline) | 2000cPs |
| Max. particle size | 0,5mm |
| Operating temperature | <90°C |
| Adjustable flow rate | 12 - 30 l/hr |
| Homogenisation pressure | 600bar |
| Homogenising stages | Two |
| Number of plungers | Two |
Material
| Product side | SS316 |
| Mobile skid / frame | SS304 |
Dimensions
| Width x Depth x Height | 900 x 700 1400 mm |
| Empty weight | 180 kg |
Technologies
Each group is generally divided into three categories:
Category 100 Table-Top / Bench-Top system:Standard units with limited options based on the plug & play principal.
Category 200 Advanced laboratory system
Standard units, with a broad range of options.
Category 300 Pilot system
Standard Modular build units, based on customer specification
